Cable Tray Products Description, Application, Specification and Advantages

We are manufacture of cable trays in the following thicknesses - 1.2 mm, 1.5 mm, 1.6 mm, 2.0 mm, 2.5 mm, and 3.0 mm. & width - 50 mm to 1000 mm, cable trays are available in a different finishes like MS, Hot dip galvanized, powder coated, painted etc. The cable tray accessories for perforated ladder type cable trays are vertical bends, horizontal bends, inside bends, outside bends, reducers with radius 300, 600, 900 are availability. 

Product Description

In the Electrical wiring of Buildings / Malls / Cement Plant / Power Plant, a cable Tray system is used to support insulated electric cables used for power distribution & communication. Cable Trays are used as an alternative to open wiring or electrical conduit systems & are commonly used for cable management in commercial & industrial construction. They are especially useful in situations where changes to a wiring systems are anticipated, since new cables can be installed by laying them in the Tray, instead of pulling them through a pipe. 

Application

Several types of Tray are used in different applications. A solid bottom tray provides the maximum protection to cables, but requires cutting the tray or using fittings to enter or exit cables. A deep, solid enclosure for cables is called a cable channel or cable trough. A ventilated tray has openings in the bottom of the tray, allowing some air circulation around the cables, water drainage & allowing some dust to fall through the tray.

Small cables may exit the tray through the ventilation openings, which may be either slots or holes punched in the bottom. A Ladder tray has the cable supported by a traverse bar, similarly to the rungs of a ladder, at regular intervals on the order of 4 to 12 inches ( 100 to 300 mm) & width of the ladder 100 mm to 1000 mm. Ladder & ventilated trays may have solid covers to protect cables from falling objects, dust & water. Tray covers for use outdoors or in dusty locations may have peaked shape to shed debris including dust, ice or snow. Large power cables laid in the tray may require support blocks to maintain spacing between conductors to prevent overheating of the wires. Smaller cables may be laid unsecured in horizontal trays, or secured with cable ties to the bottom of vertically mounted trays.

To maintain support of cables at changes of elevation or direction of a tray, a large number of specialized cable tray fittings are made compatible with each style & manufacturer. Horizontal elbows change direction of a tray in the same plane as the bottom of the tray & are made 30,45 & 90 degrees forms, inside & outside elbows are for changes perpendicular to the tray bottom. These can be in various shapes including tees & crosses. Some adjustable elbows useful for field-fitting a tray around Obstacles or around irregular shapes. Various clamping, supporting & splicing accessories are used with the cable tray to provide a complete functional tray system. For example – Different sizes of cable tray used within one run can be connected with reducers.

Technical Specification

Common cable trays are made of Galvanized Steel, Stainless Steel or Aluminium. The material for a given application is chosen based on where it will be used. Galvanized tray may be made of pre-Galvanized steel sheet fabricated into tray or may be hot dip galvanized after fabrication. When galvanized tray is cut to length in the field, usually the cut surface will be painted with a Zinc-rich compound to protect the metal from corrosion. The cable trays M.S.Material used shall confirm to I.S.-2062 & Galvanizing shall confirm to I.S.-2629. The Zinc coating shall confirm to I.S.- 4759. We can provided Test Certificates for Material & Hot Dip Galvanized. We can supply in Powder Coating Trays also (Through 7 Tank Process). The Cable Trays are made of Standard Raw Material Manufacturers like- JINDAL / ESSAR / LLOYDS etc.

Material Specifications

STEEL- MS 1079 (O) with 1 mm, 1.2 mm, 1.4 mm, 1.6 mm, 2.0 mm, 2.5 mm, 3.0 mm, 4.0 mm thickness.

Advantages Of Cable Trays

• Cost Saving

• Design cost Savings

• Dependability

• Installation cost and time saving

• Material Savings

• Maintenance Savings

• Space Savings 

We are the leading Cable Tray Manufacturer in Pune and supplier of Hot Dip Galvanized Cable Tray in Pune. We are working sincerely to render several services related to our Storage Systems to respectable clients. The services include assembling, delivering and after sales support. We are popular for our installation services which are provided by our team of professionals.